Horizon D+ Series Multi-Point Drive Solar Tracking Systems
High Adaptability Gradient difference adaptability to uneven terrain in N-S direction up to 15%
High Stability The multi-point drive greatly increase the wind torsion resistance and critical wind speed
Compatibility Compatible to 182/210mm cell solar modules
Accessibility Obstacle-free among independent trackers, easy for construction and maintenance
Reliability The independent control system help to monitor the operation, find fault points in time, and reduce power output loss
Smart Tracking Adjust tilt angle smartly and timely according to terrain and weather data to increase power output
Reasonable Design The stability is ensured via exclusive structural design and strict wind tunnel test
| Tracking Technology | Horizontal Single Axis Tracker |
| System Voltage | 1000V / 1500V |
| Tracking Range | 士45° |
| Working Wind Speed | 18 m/s (Customizable) |
| Max. Wind Speed | 45 m/s (ASCE 7-10) |
| Modules per Tracker | ≤120 Modules (Customizable) |
| Principal Materials | Hot-Dip Galvanized Q235B/Q355B / Zn-Al-Mg Coated Steel |
| Drive System | Linear Actuator / Slewing Drive |
| Foundation type | PHC / Cast-in-Place Pile / Steel Pile |
| Control System | MCU |
| Tracking Mode | Closed Loop Time Control + GPS |
| Tracking Accuracy | <2° |
| Communication | Wireless (ZigBee, LoRa); Wired (RS485) |
| Power Acquisition | External Supply / String Supply / Self-Powered |
| Auto Stow at Night | Yes |
| Auto Stow During High Winds | Yes |
| Optimized Backtracking | Yes |
| Protection Degree | IP65 |
| Working Temperature | -30°C~65°C |
| Anemometer | Yes |
| Power Consumption | 0.3kWh per day |
Write your message here and send it to us
