Horizon D Series Single Point Drive Solar Tracking Systems
| High Adaptability | Gradient difference adaptability to uneven trrain in N-S direction up to 15% |
| Less Pile | The 2P module design saves pile foundations (to 140 pcs/MW) and greatly reduce the cost |
| Compatibility | Compatible to 182/210mm cell solar modules |
| Accessibility | Obstacle-free among independent trackers, easy for construction and maintenance |
| Reliability | The independent control system help to monitor the operation, find fault points in time, and reduce power output loss |
| Smart Tracking | Adjust tilt angle smartly and timely acording to terrain and weather data to increase power output |
| Reasonable Design | The stability is ensured via exclusive structural design and strict wind tunnel test |
| Tracking Technology | Horizontal Single Axis Tracker |
| System Voltage | 1000V/1500V |
| Tracking Range | ±45°/±60° |
| Working Wind Speed | 18 m/s (Customizable) |
| Max. Wind Speed | 35 m/s (ASCE 7-10) |
| Modules per Tracker | ≤60 Modules(Customizable) |
| Principal Materials | Hot-Dip Galvanized Q235B/Q355B, Zn-AI-Mg Coated Steel |
| Mean Coating Thickness | ≥65 micron |
| Drive System | Slewing Drive |
| Foundation type | PHC / Cast-in-Place Pile / Steel Pile |
| Control System | MCU |
| Tracking Mode | Closed Loop Time Control + GPS |
| Tracking Accuracy | <2° |
| Communication | Wireless (ZigBee, LoRa); Wired (RS485) |
| Power Acquisition | External Supply / String Supply / Self-Powered |
| Auto Stow at Night | Yes |
| Auto Stow During High Winds | Yes |
| Optimized Backtracking | Yes |
| Protection Degree | IP65 |
| Working Temperature | -30°C-65°C |
| Anemometer | Yes |
| Power Consumption | 0.3kWh per day |
Write your message here and send it to us
